Overview of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:
Foot switch activated benchtop hot melt metering system with PID temperature control to apply precise, repeatable hot melt patterns to components moved under the nozzle. The machine should be pressurized with dry air and purged occasionally.
The Benchtop Pneumatic Hot Melt Tank with Foot Pedal allows for simple, low-cost, hands-free dispensing. Use this hand free glue machine with almost any bulk hot melt adhesive formulation. The small hot melt glue machine is a complete system and includes a 1.5kg bulk tank, foot pedal, variety of nozzles, built-in shot timer, and more.
This complete system is the easiest and most cost-effective benchtop hot melt dispensing system. The small glue machine provides standard 220V of power and includes everything you need to get started! Simply connect to any standard air compressor and you’ll be dispensing hands-free in no time.
Features of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:
1. Shot Timer:
The built-in shot time allows for a timed amount of hot melt to be dispensed every time the foot pedal is pushed. This means users can provide the same, repeatable amount of hot melt adhesive every time. The shot time can also be disengaged for manual dispensing if the application calls for it.
2.Temperature Control
An easy to use control switch provides an easy to change variable temperature adjustment to the glue tank. Temperature adjustment can be anywhere from 0-250C.
3.Ease-of-Use
This complete system is the easiest and most cost-effective benchtop hot melt dispensing system anywhere. It provides standard 220V power and includes everything you need to be dispensing hot melt hands-free in minutes. Simply connect to any standard air compressor and away you go.
System Includes:
- Bulk Hot Melt Tank (2 Liter)
- Foot Pedal and Connector
- 3 Nozzle Types (Varying Orifice Sizes), Optional accessories
- Built-in Shot Timer
- Adjustable Temperature Control
Specification of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:
| Model | JR604 | JR605 |
| Voltage | 220V.50HZ/60HZ | 220V.50HZ/60HZ |
| Power | 800W | 800W |
| Temperature control device | Mechanical | Mechanical |
| Storage capacity | 1.5KG | 1.5KG |
| Melt speed | 2KG/Hour | 2KG/Hour |
| Use Viscosity | 1000-20000CPS | 1000-20000CPS |
| Operating Temperature | 0-250C | 0-250C |
| Weight | 18KG | 17KG |
| Installation dimensions | 48*36*58cm | 36*26*52cm |
| Glue barrel diameter | 100mm | 100mm |
| Heating mode | Electrical Heating | Electrical Heating |
| Working principle | Air Pressure | Air Pressure |
Application of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:
Leave Your Information:
Reviews
There are no reviews yet.