Benchtop Pneumatic Hot Melt Tank with Foot Pedal Model: 2L

 

Overview of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:

Foot switch activated benchtop hot melt metering system with PID temperature control to apply precise, repeatable hot melt patterns to components moved under the nozzle. The machine should be pressurized with dry air and purged occasionally.

The Benchtop Pneumatic Hot Melt Tank with Foot Pedal allows for simple, low-cost, hands-free dispensing. Use this hand free glue machine with almost any bulk hot melt adhesive formulation. The small hot melt glue machine is a complete system and includes a 1.5kg bulk tank, foot pedal, variety of nozzles, built-in shot timer, and more.

This complete system is the easiest and most cost-effective benchtop hot melt dispensing system. The small glue machine provides standard 220V of power and includes everything you need to get started! Simply connect to any standard air compressor and you’ll be dispensing hands-free in no time.

Features of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:

1. Shot Timer:

The built-in shot time allows for a timed amount of hot melt to be dispensed every time the foot pedal is pushed. This means users can provide the same, repeatable amount of hot melt adhesive every time. The shot time can also be disengaged for manual dispensing if the application calls for it.

2.Temperature Control

An easy to use control switch provides an easy to change variable temperature adjustment to the glue tank. Temperature adjustment can be anywhere from 0-250C.

3.Ease-of-Use

This complete system is the easiest and most cost-effective benchtop hot melt dispensing system anywhere. It provides standard 220V power and includes everything you need to be dispensing hot melt hands-free in minutes. Simply connect to any standard air compressor and away you go.

System Includes:

• Bulk Hot Melt Tank (2 Liter)
• Foot Pedal and Connector
• 3 Nozzle Types (Varying Orifice Sizes), Optional accessories
• Built-in Shot Timer
• Adjustable Temperature Control

Specification of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:

Model	JR604	JR605
Voltage	220V.50HZ/60HZ	220V.50HZ/60HZ
Power	800W	800W
Temperature control device	Mechanical	Mechanical
Storage capacity	1.5KG	1.5KG
Melt speed	2KG/Hour	2KG/Hour
Use Viscosity	1000-20000CPS	1000-20000CPS
Operating Temperature	0-250C	0-250C
Weight	18KG	17KG
Installation dimensions	48*36*58cm	36*26*52cm
Glue barrel diameter	100mm	100mm
Heating mode	Electrical Heating	Electrical Heating
Working principle	Air Pressure	Air Pressure

Application of the Benchtop Pneumatic Hot Melt Tank with Foot Pedal:

 

Leave Your Information: